Step 1- Double press the MENU button (M) to get into the settings menu (pressing interval should be less than 0.3 seconds)
Step 2- Short press the MENU button a total of 6 times, until you get to a screen that reads SPL (Speed Limit)
Step 3- Press the UP (+) button to raise your speed limit for pedal-assist mode to 28mph, and press the MENU button again to save the setting
Step 4- Double press the MENU button again to exit from the settings menu.
Step 5 - Disconnect the throttle connector. We would recommend you take the half-twist throttle off your handlebar, as strictly speaking, a Class-3 ebike should not have a throttle on it.
You may refer to Section 4.4.3 of the user manual for a better understanding of your ebike's settings.
CAUTION: If you change the Speed Limit (SPL), you may render your ebike non-compliant
with local regulations. Please check your local rules and regulations first before you adjust
the speed limit. Make sure you operate your ebike in accordance with local rules and
regulations in your area.